Re: Programming uno problem
dennis quinn <dennisq@...>
toggle quoted messageShow quoted text
Thanks for the reply, however I fear I may be asking the wrong question !
My problem is more straightforward ; I want to use the expression pedal(s) on the 1010 to control volume on my Rocktron Voodu Valve guitar pre-amp. I have used a Roland FC 200 with no problem but the 1010 will not play ball.
Any ideas ?
From: firstname.lastname@example.org <email@example.com> On Behalf Of chrisw_63
Sent: 16 June 2021 16:53
Subject: Re: [fcb1010] Programming uno problem
Does sound like a cheap USB MIDI adapter problem. For those who don't know and might be interested... The cheaper MIDI USB adapters use an (obviously) cheap microcontroller to take MIDI from USB and send it to the DIN plug, and vice versa. For most MIDI - notes and control messages - this works fine (assuming it works at all - not a guarantee with the cheap ones). But the cheap micros have a very small amount of memory, and USB is much faster than MIDI. So when Control Center tries to send the large SYSEX command to the FCB1010 at USB speeds, their tiny memory gets overwhelmed and some of the SYSEX message is lost. Think of it like batting practice with a pitching machine. If you're good, a few balls a minute is fairly easy to hit, no matter how fast the machine is pitching them. Jack that machine up to a few balls per second, and the batter is going down.