Bearing in mind this group has an international membership, John, please tell us your location and whether you'd prefer to set any shipping limits for your FCB1010? From your email address, it seems

Cleaning out a my studio storage and find a as new sealed box unit / no damage no marks. Was a back up to a long ago project and forgotten . Pristine condition w original unit inside make offer

Alexis Sorry I didn't understand your question and did not think it was possible to assign the updown switches as 11 and 12. I have I believe chip #12 and my chip does not do this function but it

Hi Ossandust, great, thanks for your reply! I was a little worried if I got everything figured out right, especially the syntax. Also thanks for the hint regarding the Relay. I will check that out.

Hi Alexis, your setup is as easy as it can get - 1 message per switch, it should work without problem, did you try it? "open relay 1 for a really short time (not toggle)" -> for that you would need

Hi Dave, Thanks for your reply! I’m not quite sure if I get your point but to make things clear, I am planning to use the fcb for remote controlling a system for live looping in a DAW Software

Alexis not quite sure why using the up down switches when you simply change to another bank but have you considered using the toe and or heel virtual switches on each expression pedal to get your

Hi everyone, since there was no reply on my original post in the Ono2 Subgroup yet, I'd like to share my requirements and the script I worked on here in the main group in hope to get some feedback and

Yes, I think the TinyBox might be good. For me, for anything that UNO2 cannot handle I use a BomeBox.

Thanks for the info. I did open it up and have the 2.4.1b firmware chip. I ordered the latest Uno chip (1.0.4). I'm waiting to get hold of the iConnectivity mioXM Midi/USB host box that lets you

Hi With the stock FCB1010 firmware, the simplest way to set up and program the controller is to use the Mountain Utilities software. There may be a link to or a copy in the files section of this

Hello, I just acquired an FCB1010 with a stock chip v2.4.1b (July 2003) installed. I've read a bit about the UNO and UNO2 chips and the expanded capabilities possible there. It sounds like any

??? Need more info. Specifics, please. It's been a long time since I had the stock chip in my FCB, but it sounds like you're doing a Factory Reset, not a sysex transfer. What chip version? What

I have done all the necessary steps, but at the end of the process, instead of counting down as it is supposed to do, it just goes to the 00 and the syx was not transmitted.

UnO v.1.0.4PURCHASE NOW26 € UnO2 v.1.4PURCHASE NOW50 €, incl. editor UnO4Kemper v.1.4PURCHASE NOW26 € FCB-505 v.1.0PURCHASE NOW26 € So, as I did read on this thread, I can use several chip

On Sun, Feb 19, 2023 at 10:59 PM, harmonicabr wrote: what makes the uno2 so expensive?UnO firmware + FCB/UnO ControlCenter = 50€ + 12€ shipping UnO2 firmware + UnO2 ControlCenter = 50€ + 12€

Hi, guys. I got a fcb1010 and a rc600. Completely new to the midi controllers world, doing some research and asking for some help here. I'd like to have more assignments, using the non clickable

Hi Guys, it seems that the link to donwload Ed Dixon latest version 2.99-7 is no more reacheable. Is there one of you gys that can send me this version? At teh monent I'm using version 2.99-2 but has

Hi Timothy, If you have a stock chip (maybe v2.5?) that you don't use, I'll be happy to test it with my FCB1010. Let me know how we can organize that. So more updates here when I could test my

I have a pretty new stock v2.5 chip you can have. I bought the FCB1010 from Amazon, open box, with the stock chip and I have upgraded to the Uno 1.4 and then to the Tinybox (Love the Tinybox). I don't