Cool! I thought I’d read that the Eurekaprom version did that, but wasn’t sure about UNO.

The Uno4Kemper does seem to have 2 way communication. If you switch on an FX of the Kemper panel the light comes on on the relative FCB F/switch. I imagine it's this functionality that a customisable

Probably not, though I don’t know how much better UNO4Kemper is at that. The FCB is one-way communication. The Uno chip can be set up to “fake” 2 way communication, by sending Stomp messages at

Agreed.....in addition to programming the FC to the Kemper I don't think it's going to be possible for it to reflect F/S on and off statuses when changing patch/preset. Your thoughts? Ian Sent from my

Yes, Thank You! Also, UNO4Kemper is probably going to save you a whole lot of grief! Good Luck!

Did the FC200 manual come through to you OK? Ian Sent from my Samsung Galaxy smartphone.

Sounds like I'll stick with the UnO4Kemper & FCB and sell the FC200. Shame tho as its a well built bit of kit! I assume a proper in depth midi knowledge is required then. Can only just find time to do

Nothing is impossible if you have a true desire, which usually stems from need. If I ever NEED to use sysex for something, I’m sure I’ll be able to learn it. Until I NEED to learn it, I’d rather

System Exclusive is not really too difficult once you understand the concept and how to read the reference tables. What is usually more difficult is finding the right software to convert to the MIDI

“It looks like the FC-7 actually was not even a MIDI device. “ CORRECT! “The BK7M is and the MIDI implementation document is actually quite extensive.” If you can suss out the MIDI

Thank You Rolf, for digging up that document. If you ever succeed in finding specific documentation of the sysex messages required for the BK7M, please post that info in the files section. Maybe

It looks like the FC-7 actually was not even a MIDI device. The BK7M is and the MIDI implementation document is actually quite extensive.

Attached is a document that explains the Roland mini SysEx implementation. Don't try to become an expert in SysEx programming or checksum calculation. First you need a program to send the commands,

Oops...meant to type "haven't really read" not "Have really read". Sorry, don't want to portray myself as a FC200 expert!. Ian Sent from my Samsung Galaxy smartphone.

Up until about 3 Years ago I was using a Boss SE50 with a FC100 mk7 II. I had to have a mmc>midi box as the fc100 only had a mmc socket. It was wwaaaayyyy before I had any knowledge of midi and just

I’m not doubting you, just trying to get a copy I recently did a lengthy study for someone on the L6 Helix forum on how to get the Helix to call presets on the KPA. Only piece of MIDI equipment

We try. Unfortunately, I suspect that the secret language spoken by the FC7 and BK7M are destined to forever be shrouded in mystery!

I have really read the FC 200 manual as I had a Gt pro and bought it for "manual" mode where it's set up for Gt pro fx on/off add. Have a Kemper now and am certain it can be programmed to work but was

If you could attach the actual manual and send it to me at my personal email (bluesrock13@...), I’d appreciate it! I’ll add it to my collection of obscure and discontinued tech. Thanks!

Also, Roland is not alone when it comes to short term and poor product support. Fortunately we have forums like this to fill in the gaps.