Hi Rob! Fellow linux user here :-) Sooperlooper: ========== The key sooperlooper bindings I use are: - record (the main "let's start/stop laying down a loop) - mute_trigger (as a "dear god,

Sanity check: the switch fails in self test? If it passes self test, you may have a programming error, like it is trying to toggle switch 1 relay instead of sending a message. -Rob

Greetings! I recently bought a used Behringer FCB1010 and am learning to program it, slowly... with the help of this very well done youtube video from "In The Mix" Behringer FCB1010 Full Tutorial /

The wording of your post leads me to believe you are involved with the 'article' in some way. I'll post some criticisms that you can 'forward' to the author. The guide doesn't cover half of what the

Here is an interesting article that provides a guide to the FCB1010. You will love to read it https://baninii.com/2020/12/03/guide-to-the-fcb1010/ Kofi

As usual, since I don't know you or your familiarity with MIDI, etc, I may explain things you already know - Apologies if that bothers you. How are you connecting the FCB1010 to the Tyros? It can

Hello Had FCB1010 for years but after several attempts to use with Tyros 5 found it under dust. Perhaps might be worth trying again. I might need some practical assistance. In Tyros there is ready

Thank you for your help EJ I wasn't in Direct Select after all - just a basic misunderstanding. For some reason I thought that each preset contained settings for all the foot switches - now I realise

It sounds like you're in "Direct Select" mode. If, after you press 1, you then press another pedal, for instance, 3, you'll then go to preset 13, and that's what the FCB will send via MIDI. In that

I am completely new to FCB1010 and rather puzzled. Is this an easy one? I do hope so. I see that, when first powered on, the unit is in a mode to select the bank and preset. If I press pedal 1 the

Hi EJ An update regarding PROBLEM 2 on my previous mail. Update: "Locate the com.apple.logic.pro.cs file found HD>Library>Preferences. Copy that file somewhere, if your control surface settings have

I live in Portland OR. I was only looking to replace the switch, but the one time I looked at it, it looks too integrated into the circuit board to do any quick component change-outs.

Let me know if you want it. I have it listed for $75+ shipping.

I have the whole unit in Florida.

Problem 1 - The AUDIO track will ONLY record AUDIO. To record the MIDI info, you need to record the MIDI track also. Refer to my screenshot attached above. Set BOTH tracks to RECORD. Problem 2 - What

Hi Ej sorry for the late response work was hectic. :( Actually I find out two solutions but none of them completely solve my issues Solution one: (I think it is similar to what you meant. This guys

I am in Massachusetts in the US. If u are in the states, it would not be too expensive to ship.

Where do you live?

Sadly, Behringer didn't use the highest quality switches. They do die on occasion. They can be replaced if you're handy with a soldering iron, but while it's easy to find buttons that "work" and fit

Hi, I am not getting any signal from pedal switch #1. I tried writing to Behringer pre-Covid and they didn't respond. Anybody had any luck besides my dead-end outcome?