SOLVED!! I.D.10-T Error!! In my PC editor, I had the wrong MIDI input selected. So none of my preset edits were being uploaded to the FCB! I changed the MIDI input, trandsmitted the SysEx one more

I think I have it setup how you described. I exited Reaper and went into the Amplitube standalone version. My audio input and MIDI input appear set correctly. When I step on pedal 1, I see the MIDI

The following assumes that you are using the stock FCB Chip (not UNO): The EXP pedals have to be configured in every preset. You have to select a preset before the pedals become active. In Amplitube

Hello, I think I must be overlooking something obvious here but I cannot get my expression pedals to do anything in Reaper. I'd like to set Exp B to be my wah-wah pedal in Amplitube 4. (I'm in the

Thank you so much for the info, but the problem is with the new Boss Rc500. I had the 505 and it worked ok with the chip.

The FCB-505 firmware just sends a hardcoded MIDI message with each switch press/release, it doesn't contain banks, it doesn't require any setup, so there can be no problem with a MIDI interface. You

Cleaning storage room during quarantine and found a never opened new in box unit. Figure I’d offer it here before Reverb/eBay. Offers..../ questions. Feel free jld

Thanks to all of you for the advice on pc software. I echo the sentiment of the free software route when possible but know when it's time to pay to get results. On free software, midi wrench is good

Hello Everyone, thanks for taking the time to read this topic that some people may find interesting if resolved :-) !! I recently purchase both FCB1010 and RC500. I previously connected the FCB1010

I second (third) what the others say - UnoControlCenter is brilliant. I'm reluctant to spend on software to do things I can probably somehow do for free but this has been totally worth it. My "three

EJ Speaks the truth. I couldn't use my FCB1010 until I got UNO Control Center. I wasted more time trying to save a few dollars than I care to admit. Time I will never get back. Get it and move

UNO_ControlCenter. The absolute best for both UNO and the stock chip. https://www.fcb1010.uno/ <>$22 and worth every penny. PC and MAC versions.

Hi everyone Is anyone using an effective pc editor for the 1010? I have installed windows FCB 1010 PC EDITOR. & FCB1010 MANAGER, but neither are working although I get data flow I tried a test setup

I switch it around a bit. I set my FCB1010 to channel 7, One and done. Most VST's will listen to channel 1 (or whatever you call the first channel) by default, so they never see the FCB1010, and I

Muting tracks is a Cubase function. Changing presets in a VST is a VST function. Cubase likely listens on Ch1. Set your VST commands to send on CH 2, and set the VST to listen on CH 2. Can't tell you

I've finally managed to map my FCB1010 on Cubase 10.5 PRO. Now the last problem that I want to resolve is that while I'm pressing a pedal to have a specific result (just muting some tracks and

Just to inform everyone that I finally managed to solve my problem. Thank you all, you were fantastic!

Thanks. EJ Sheldon You put me on the right track. The global setting in HXStomp was already set to per preset all I had to do was set the main output volume I required per patch and save it at that.

The type of programming involved with using the UNO2 Chip Editor vs the Stock or UNO chip using the UNO-ControlCenter GUI is night and day. The UNO2 Chip is fully programmable, but you're using actual

Your email is confusing but you have to have a value programmed on the switch to auto learn it. You need to know if your device wants to auto learn a CC or PC message then program the switch then