I can confirm that there must have been a temporary server connection issue about 8 to 9 hours ago, causing the license database to be inaccessible. Things are working correctly again, new code has

There seems to have been a server connection issue - will need to look into it after working hours. In the mean time I have blocked your license code for obvious reasons - I will send you a new code

Entered info as on the box, tells me it's incorrect. Tried Opera, Chrome and Edge. Screenshot attached.

Hi again Since William awaked my curiosity, I just setup the 10 switches of my FCB1010 to match a Tyros function. So, here is how it is done. First set the FCB1010 MIDI channel to whatever you

Hi again Here I want to share some things that I forwarded to William. In case that somebody else has a Tyros and wants to try it. On the YouTube video, not all note numbers will be shown. This means

By the way, the YouTuber also mentioned that the table can be found on page 10 of the FCB1010 manual. You can get a copy from

Dear William On my previous post, you will find a link to this video: https://www.youtube.com/watch?v=hqt-fk5ZyWk I also put the time marks were you will find all the information. You are looking for

Hi Josef Now home and red throgh your message angain carefully. Few questions thoug. - In Tyron mfc10 template you can .... send the seleced functions of all 10 buttons via midi a or b and channal

Hi William I'm also looking fordward for doing the same, but I haven't had the time yet. Anyway, I found this video: https://www.youtube.com/watch?v=hqt-fk5ZyWk It is unfortunatelly in german, but I

Hi Chris. Still strugglin ;). Cant find neede note numbers. Found some like main A-D My target is too use FCB 3 memory banks with slightly different functions. And needed assignable functions are

It seems that a few new applicants to join our group do not receive our Questionnaire email in their Inboxes and, because they don't reply to that email, they are never granted membership.

Never used Guitar Rig outside of my DAW (and don't use it much, really), so I didn't know about NI's ASIO driver. Thanks EJ.

I've been using my FCB with Guitar Rig since GR2, so I do know of what I speak. I have NOT upgraded to GR6 from GR5, but they didn't change anything significant, just added a couple of new amps shot

You want the UNO Chip. Whether you want the Original UNO or UNO2 depends on your needs and your programming skills. With the stock chip you can program the switches to Toggle, but the LEDs WILL NOT

Hi Geoff, Following the messages here for quite a while, never heard anyone combining Guitar Rig 6 and FCB 1010. I have no answer to your problem but if I may, can I ask you this: Were you used to the

This is most likely a problem with too much running on the computer/ipad. If you have a lot of effects running at the same time, or too many background processes, the audio system can bog down and

Hi all, I’m getting a cracking/popping noise when I turn an effect on/off in Guitar Rig 6 while using the FCB1010 midi controller. Any ideas what could be causing this & how to to possibly fix

Just got pedal for xmas, want it to act as multi pedalboard. On/off for bottom row. I can program expressions fine. Want each pedal with light on for on and same with off. Like the rp1 or rp100 from

Nooo, how couldn't i can see that before, thanks:)

Your first 3 presets are sending the OFF message on Preset Load. 4 and 5 are sending NO CHANGE. If it's OFF it'll stay OFF and vice versa.