ok, after running through the source code I believe the solution for you will be to delete the .plist file, which should be located at $HOME/Library/Preferences/be.gordius.FCB/UnO Control Center.plist

Reinstalled the application several times. Shut off WiFi so only one NIC is active (ethernet) and removed the appendage from my Computer Name. Still have to register every time. Screen shot #1 shows

This is the link to the vid I think you're talking about. https://youtu.be/8m0v3Rr6f4U Ian Sent from my Samsung Galaxy smartphone.

Hi, remember having similar issues with the expression pedal. Then I saw a Youtube video, from someone in Italy, that did a mod in his FCB reducing sensitivity of the optosensor in a very easy way. I

While it's possible your problem is firmware, it's also a known issue with the FCB1010 that, sometimes, the sensor arrangement is out of alignment inside. Usually, it's the graduated transparent

Hi Norman, apparently my email reply (sent on 07/06/20) got blocked by your email provider. Here's a partial copy (you're correct about the purposeful hysteresis, so I removed that from the reply

My FCB1010 with the original Behringer "FCB1010 V2.5" chip has the appearance of a "sticking" expression pedal. The pedal is moved slowly -- no output, then all of a sudden jumps to action if the

Hi sp, nothing changed with the new software version : the computer is identified by its name, and apparently a Mac (in some cases) changes its name when a different router is used. You indeed need

Hey Ossandust, I completely understand where you're coming from. Apple hardware is expensive and I appreciate that you made a solution for Mac users, especially considering the close ties Mac has

Hi Nic, the FCB1010 is not a MIDI device which can be recognized by your Mac. The Mac only recognizes MIDI-USB devices and lists them in ControlCenter. Also there is no "hierarchy" in MIDI-USB

Glad to know you are still working with the small EPROM Uno and also working in a new version of tiny... And yet, I have a problem for you... I recently bought a Uno firmware 1.0.4 and FCB Uno control

As for the Google question, I did some research and found that Google Groups has not been updated since 2013. Given Google's tendency to drop services that it no longer has any interest in, moving

I fully agree, Google only uses "free" to lure you into getting established. Just ask all of the smaller companies who used to be able to use Google's location services for free. I'm more than happy

Having realised that only the original message was sent to all members as a Special Notice, but replies are not, I've unlocked the topic again. I'll take this opportunity to express my thanks to all

Many thanks, EJ. I'm now locking this topic from further comment as it would otherwise be distributed to the whole membership, many of whom have unsubscribed due to receiving this Special Notice. For

Roger - Thank you for the effort you put in to continue this worthy cause. Since I'm currently flush (like, the sun is out...) I've made my annual donations to both forums. PLEASE do not move to

Thanks for your question, Stephen, I guess this is as good a place to ask as anywhere else! I haven't extensively researched Google groups in the past, except I read lots of negative opinions and

Hey, Roger! Not sure if this is the correct place to ask/request, or if this possibility that has been investigated, but would migrating to google groups be a possibility? FWIW, it’s free and has

Brief History When FCB1010 and FCB1010_UnO groups were successfully migrated from Yahoo Groups to Groups.io (GIO) in October 2019, in order to maintain/store all previous data (which Yahoo has since

Check out the new UnO2 chip it does default to whatever you want upon powerup. It makes the FCB1010 a completely different pedal and way more advanced functionality than before