Hi, I didn't see a link for actually ordering the firmware. Jack Fenton jack_fenton@...

It looks like by default the left expression pedal is CC4 and right is CC11 so probably best to set your FCB1010 up that way.

I want to make a question to the community. I have an old (guitar) sound processor from the '90s. It is the ART SGX 2000, and I am using the FCB1010. I can use the banks and direct access

Two questions: 1. What should the display show if the start up sequence has finalized OK? 2. Is there a list of error codes somewhere? (I have tried to find answers to these questions in the FAQ and

No.

Probably a dumb question. I have the Uno 1.0.4 installed. I use it to control a Beatbuddy. I used to have a RJM Mastermind LT but switched to the FCB1010 because the bottom buttons are so much closer

Super Exciting, going to verify with the editor today and order one as soon as I am sure it works. Thanks so much for all your hard work!

I am in the same situation, unfortunately. Brand new FCB1010, directly out of the box, shows blinking 88 at startup. No programming, no self test, no revert to default settings possible. Is this

I just released brand new firmware. "UnO2" is not a successor for the current "UnO" firmware. It's a shrinked down version of the TinyBox firmware (https://www.tinybox.rocks), which takes a

That was it... Thank you! Len

It's the Behringer tap-tempo functionality, described in chapter 2.6 of their manual. If you have UnO firmware you can disable it in the global settings. With Behringer firmware you can't disable it,

Good morning FCB Group, Below is a MIDIOX screen shot of the Midi input from the FCB. I have only a note number turned on in the FCB verified using the editor. Button 1 is set to send Midi Note 1

Cool! Looking forward to it!

Just what I needed, thank you! Now for the time. Gaylord

I have created a completely new ControlCenter for the future UnO2 firmware and TinyBox hardware. It has a MIDI monitor embedded, which is also available as a separate free download for Windows and Mac

This post explains how to set up the MIDI channels, program a preset, set expression padel A for volume and the most common problems [URL redacted by moderator]

Hi All, For any who may be interested, I'm selling off some gear. This includes the pedalboard I constructed for a previous project, which includes: Gordius Little Giant Module in good

I’m a new member as I just bought a brand new FCB1010 on March 30, 2020. I’m setting up a woodwind controller with software and needed the expression pedal function. As I’m learning the software

Thanks for your trouble EJ. David.

I checked the manual and didn't see that capability.