Isopropyl Alcohol will loosen regular hot glue. It may take several iterations of applying it, loosening the glue a bit then adding more to seep into the new cracks.

What's the brand of the USB MIDI cable you are using? You said 20 Euro, so I have to say most sold in that price range are a coin toss at best. The ones that seem to work will work for notes, but drop

That's how I'd do it, and how we used to share sheet music. I'd use PDFSam to stitch all the PDF's together in the right order, then upload the file to Dropbox. Last minute changes were easy, since th

While this is not an FCB1010 question, I have seen something similar on Reddit recently. Is your buddy using a Mac? Some recent change to MacOS lets it decide to move stuff to iCloud without telling y

Each foot switch press can send 5 PC messages, 2 CC messages, and one Note message. Also sets the Pedal CC#s, but that's technically not an 'output'. There is also a 'Toggle' function, which can send

hehe.. One last tap-dance before you go? :-)

Unless they're damaged or in bad shape, they're probably fine. I used the same ones (mine were 10 ft, iirc) for several years, and still have them (they just don't get used as much lately). If you dou

Thanks Ossandust and EJ Sheldon for setting me straight!

It won't send a bank number unless you set it up, since that's totally separate from PC messages. Do you need to do this? Once you set a bank, you don't have to send the same one again if all the patc

Yup... Select patches in MainStage using program change messages. "When you add a patch to a concert, the patch is given a MIDI program change number (the lowest available number) until all available

Yep.. I was just getting the info out there, in the hope that enough nagging (from us) will get developers to update their stuff. (I know.. pipe dream...) Since Steinberg ALSO killed VST2 licensing, y

Just an FYI: From Steinberg's forums, VST3s can accept and use PC messages, but not by default. The VST3 has to be configured to accept them. Still kinda stupid, but not as stupid as a straight PC mes

Well one of us is confused, that's for sure! (a.k.a.: Me!) Anyway, the iConnectivity mio is a decent USB to 5-pin MIDI interface, so it should work well.

That Roland is pretty nice! Here's the obvious question: Did you change the port settings in FL studio when you changed from the 'mio' to the Roland? (I know, but I had to ask... Stuff™ happens. If th

Just in case, I found a YouTube video detailing how MIDI Learn works in FL Studio.

Please reply with your computer type (PC or Mac?), and which USB/MIDI interface you're using.

Yep!

Yes, the M-Audio Uno is supposed to be very good.

The Note/Control column just tells you what MIDI message is being sent to control whatever is listed under Name. Pitchbend is a pre-defined MIDI message that's three bytes long, and while it can be us

Transformers are designed for a specific frequency - not so much the windings as the material and design of the core. But the difference between 50 and 60 Hz isn't much, and since it has the ability t