I would only add that, while you CAN configure the FCB manually as in the video, it's MUCH easier with an editor such as the FREE MtnSystems/Ed Dixon Editor available here: www.mtnsys.com/?path=faq-fc

Re: Re: [fcb1010] FCB1010 V2.5 NEWBIE with Ableton Live Wasn’t going to chime in since Ed’s already on it but since I don’t really know Abelton I thought I’d do a quick google. Here’s the first hit –

Go for it! Your results will depend largely on your needs. If your needs exceed the capabilities of the stock chip, you can always upgrade later to the UNO2 Chip and program it to do whatever you want

I just picked up my FCB1010 today (used for $50). It has the V2.5 Chip and I want to use it for Ableton Live to do live performance looping/launching of clips, controlling effects. I tried searching,

Hi, thank you for pointing me in the right direction, I bought the UnO Control Center Editor and was able to get everything working perfectly with little difficulty, it was definitely worth the money!

Rock On!

THANKS for all of your help. Upgraded to 5.0.2 per your comment and everything now works.

I had a few minutes to mess with the recorder functions, which I had previously only briefly tried. I set up my HX Stomp to send CC#1 for RECORD and CC#2 for PLAY. Configured thusly, when I press FS1

The Ed Dixon Editor only supports UNO up to v1.0.2. You need the UNO_ControlCenter Editor which is not free, but worth every penny.

Hi Joseph, You say you could get the WAH to work. Also to get the WAH off in a preset? Regards, George Op vr 26 mrt. 2021 om 16:47 schreef Joseph Hammons <josephahammons@...>

Hello, I'm new here and have just finished installing the UnO v1.0.4 chip into my FCB1010, but I'm having no success actually using the device so far. I have plugged a MIDI cable from it's MIDI Out in

Ed, I think we are seeing different results. I can get LOOPER to work as well as WAH and VOLUME. However I cannot get REC or REWIND to work. I’m assuming those would record on a selected track in the

It's only the Looper functions I have a problem with. Keep in mind that some of the others are Toggling and some are not. I'm not at home with my FCB, so I can't be more specific from memory. Which ot

Again, unless I’m missing something, it seems the majority of the global CC’s in AT5 don’t work.

You're not missing anything. The Looper in AT5 does not respond correctly to MIDI commands. I have a support ticket open. They're ignoring me. Probably because this is the most bug-ridden release in A

Hi again, I am completely new to Midi and trying to use the FCB1010 with UnO firmware 1.0.3 trying to use Amplitube 5 on a Mac running Big Sur 11.2.3. I can get the FCB1010 to control AmpliTube preset

Thanks to everyone for the guidance. I’ve ordered the connectivity mio cable recommended by EJ.

Correct and complete answers. I have nothing to add. Or maybe 1 presumption (not a fact) : when in the selection dropdownbox the interface name is shown as something general like "USB MIDI interface",

You see that rectangular widget on the cable? That's the interface. You may need to enable RECEIVE SYSEX on the FCB (read the FCB Manual for directions). That may have been made unnecessary on v1.0.3,

You ARE using a MIDI/USB interface. It's that box in the middle of the cable. If it weren't a MIDI/USB interface, it would be useless, because 5-pin DIN MIDI and USB don't speak each other's language.