Topics

回复: [fcb1010] Upgrade Questions


"疯狂的灵魂
 

Anybody kown where I can download Uno rom?I can`t open yahoo,so I have no idea to got it .
thank you!


------------------ 原始邮件 ------------------
发件人: "David Grosz via Groups.Io"<davidgrosz2205@...>;
发送时间: 2019年12月13日(星期五) 晚上7:33
收件人: "main"<main@fcb1010.groups.io>;
主题: Re: [fcb1010] Upgrade Questions

Upgrade to the UNO chip and get their editor.  By doing so you can assign any switch to do anything
including Stomp Mode based per switch and not rows.  The Eureka Prom is for people that want a
upgrade that has function predetermined for them.  UNO to me is far and above a must have upgrade

On Wednesday, December 11, 2019, 3:14:07 PM PST, llatham@... <llatham@...> wrote:


Here's what I'd like:

Bank 0, ability to assign CC messages to each of the 10 pedals.

Bank 1, ability to have bottom row of 5 send PC messages, and top row of 5 send the following:

FS6 - CCXX, 127/0 - to toggle on and off an effect.

FS7 - CCXY on 1st press, CCXZ on 2nd press, both with a value of 127 (this is how it works stock in "toggle" mode, but the LEDs of course can't be lit with FS 1-5 lit).

FS8 and 9 would be a similar layout - 1 FX on/off, the 2nd toggle between two FX on.

FS10 - CC64 - one press 127 and that's it - I'd need to press it twice but it could be momentary instead of latch. If not, at leas the ability to send CC64 127 on the first press and CC64 on the 2nd press and have the LED go on then off in those two presses (it's for Tap Tempo on a device that uses CC64 and two presses (127 each time) in a row to give the tempo).

Bank 2 - All 10 FS send PC messages.

Bank 3 - All 10 FS send CC messages (for FX on/off, lights toggle as well)

Bank 4, some other combination of PC select on all 10 or subset thereof, or CC on all 10 or some subset thereof etc.

And so on.

From what I'm reading the Eureka upgrade just makes ONLY ONE bank a Stombox Mode, and then the other Banks do other things that are preset and I can't reprogram - is that true?

BTW, have a Mac, so programming would have to be done on the FCB itself I think.


Roger Colwell
 

Everything UnO may be found here:
https://www.fcb1010.eu/

Also, if you invest in UnO you might also apply to join their specialist group here (in our subgroup):
https://fcb1010.groups.io/g/uno
--
Roger Colwell
FCB1010 & FCB1010_UnO Group Owner/Moderator


EJ SHELDON
 

https://www.fcb1010.eu/

 

From: main@fcb1010.groups.io <main@fcb1010.groups.io> On Behalf Of "?????
Sent: Friday, December 13, 2019 4:37 AM
To: main <main@fcb1010.groups.io>
Subject:
回复: [fcb1010] Upgrade Questions

 

Anybody kown where I can download Uno rom?I can`t open yahoo,so I have no idea to got it .

thank you!

 

 

------------------ ?? ------------------

??: "David Grosz via Groups.Io"<davidgrosz2205@...>;

?时间: 201912?13?(?) ?7:33

???: "main"<main@fcb1010.groups.io>;

?: Re: [fcb1010] Upgrade Questions

 

Upgrade to the UNO chip and get their editor.  By doing so you can assign any switch to do anything

including Stomp Mode based per switch and not rows.  The Eureka Prom is for people that want a

upgrade that has function predetermined for them.  UNO to me is far and above a must have upgrade

 

On Wednesday, December 11, 2019, 3:14:07 PM PST, llatham@... <llatham@...> wrote:

 

 

Here's what I'd like:

Bank 0, ability to assign CC messages to each of the 10 pedals.

Bank 1, ability to have bottom row of 5 send PC messages, and top row of 5 send the following:

FS6 - CCXX, 127/0 - to toggle on and off an effect.

FS7 - CCXY on 1st press, CCXZ on 2nd press, both with a value of 127 (this is how it works stock in "toggle" mode, but the LEDs of course can't be lit with FS 1-5 lit).

FS8 and 9 would be a similar layout - 1 FX on/off, the 2nd toggle between two FX on.

FS10 - CC64 - one press 127 and that's it - I'd need to press it twice but it could be momentary instead of latch. If not, at leas the ability to send CC64 127 on the first press and CC64 on the 2nd press and have the LED go on then off in those two presses (it's for Tap Tempo on a device that uses CC64 and two presses (127 each time) in a row to give the tempo).

Bank 2 - All 10 FS send PC messages.

Bank 3 - All 10 FS send CC messages (for FX on/off, lights toggle as well)

Bank 4, some other combination of PC select on all 10 or subset thereof, or CC on all 10 or some subset thereof etc.

And so on.

From what I'm reading the Eureka upgrade just makes ONLY ONE bank a Stombox Mode, and then the other Banks do other things that are preset and I can't reprogram - is that true?

BTW, have a Mac, so programming would have to be done on the FCB itself I think.