I received mine yesterday. It was packed well, works just fine and it only took two days from the left coast to Virginia!!! Behringer USA rocks!!!

I'm trying to use the SWITCH 1/2 for basic toggle functions, such as tap-tempo, channel advance, and component bypass. although it does work, kind of/sort of, a single toggle operation requires that I

Anyone with any experience programming the FCB with a Chameleon 2000? I'm poring through the manuals, MIDI rookie here cannot decypher successfully. Confused and needing assistance. Any suggestions/he

hi all, ive been using the fcb1010 now for some time (upgraded it to 2.2 - thanks, lars, for the chip!). its a good piece of gear, worth its price, stabile, reliable (up to now). programming is not ea

while using the new switch-over function, i experienced the following: when i hit the switch after having changed the sound with the exppedal, those changes are reset. any ideas if and how this could

I just started using an FCB1010 to control my Behringer V-Amp 2. I am not very experienced with MIDI; so I found the terminology in the FCB1010 manual to be very confusing. But I think I finally figur

I currently own a V-Amp 2 and am looking to get the FCB1010-Rev2.2. Before I get one, I have a few questions for the knowledgeable citizens of this forum. The setup I'm looking for is to basically set

Hi, I've been looking at this unit for my POD 2. Has anyone used/experimented it with POD 2 ?? ... After reading some of the threads, it seems the FCB1010 Floorboard is a challenge to program :)... An

Hi, I just bought the FCB1010 today. After switching on the power, I noticed a background humming. This 'ground' noise was actually radiating from the unit itself physically (and NOT thru your speaker

Hello, I'm new to the group and (of course) have zero MIDI experience. So its like I'm reading the words and not understanding what the heck you guys are saying. Well, I'm happy to have found this gro

How do I get this unit to show the patch number on the display, rather than showing 00 all of time, even after I swtich patches? I'm not used to this "feature." With other controllers I've used, when

I think my expression pedals may not be working. Is there a sure fire way I can test to confirm whether or not they are working? Any thoughts would be greatly appreciated. Scott

i was able to get my exp pedals working from reading prev posts ... but now i need help setting the presets on my fcb1010 to change the presets on my v-amp2 ... i was able to dump, but i can't figure

Hi everyone, Can anybody recommend a good MIDI thru box for use with the FCB1010? I have a rig of five synths, so I guess ideally I'm looking for a 1x5 box to route through. I do wish the FCB1010 had

I've been using my FCB1010 to control a Boss VF1 for nearly a year and have FCB1010 patches set to send a Program Change which the VF1 responds to by selecting that patch number - for example program

klaus dibbelt kindly responded to my question about MIDI program change messages with; Actually it's almost brand new - it's a Line 6 Echo Pro but you're right the manual does list program changes 000

I have the fcb1010 hooked up with my rocktron voodu valve. I would like to run the midi out from my pc to the midi in of the fcb and be able to send sysex patched from the pc, through the fcb into the

what exactly are the differences between rom versions 2.1 and 2.2? "Copying Presets" and "Toggling between two controller values in a patch" are listed on the altrion site as being part of 2.2, I thin

I understand (I think) that the up and down switches can be globally set to toggle the back panel footswitch jacks in direct mode. if one or both switches *isn't* doing that, can it do anything else,

I can´t get the FCB 1010 to send tap messages to my roland GP 100 either i´ve tried everything.I used to have the Digitech PMC 10 and it would do it sending on and off messages. Please let me know if