Assuming that the new format here will essentially make it useless, my advice is to join TGP (The Gear Page). Post questions in the Digital and Modeling Forum.

Hi all, I'm having issues getting midi message from my FCB1010 to my Mac via a Roland UM-ONE Usb Midi Interface. They seem to be communicating as I've tested in the Midi Studio however when testing in

Whatever works for you, you're the one doing the work!

Regarding Donations, the Premium and Enterprise plans offer this possibility but there's a snag! Quoting GMF again: Groups that have open donation requests will see a new Donations tab in the normal g

Many thanks I will give that a try.

Hi Everyone, I currently have a rack with an Alesis Q20 and an Alesis QuadraVerb GT, these are connect in the following manner to my FCB1010: FCB1010 Midi Out to Midi In on Q20, Q20 Midi Out / Thru to

Hi there, Could one of you very kind people give me the steps to a. recv a sysEx file from the FCB1010 Midi Editor to the board, and lock it in, and b. xmit sysEx file from the board back to the FCB10

Which one? The two most common FREE utilities are: http://host.mtnsys.com:81/faq-fcb/PCEditorBeta.htm https://mountainutilities.eu/fcb1010 There's others too. Here's tutorials: https://www.youtube.com

I use the FCB 1010 to control Guitar Rig 5, and what I've been noticing ( esp while using the Looper ) is that the note is sent twice on the same click of a button. I confirmed the same with a Midi wa

Hi If I assign a value Program change, note value - anything!) to switch one all of the parameters are automatically copied over to switch 2 (or vice versa). This is the same for switches 3 and 4, 5 a

Hi all, newbee here. I've just picked up an FCB1010 and it has firmware version 1.0 on it. I've been reading elsewhere about problems with the early versions and I've found that the unit just will not

Greetings all... I'm wondering if anyone can help. I can set up cc changes to toggle an effect on or off on my Rocktron Xpression. So far I'm able to turn the effect on but with the second press, it w

HI, I am having trouble getting the Ampltube 4 (A4) looper to be controlled by FCB1010. PC changes work quite well. My Wah pedal works. I get stuck/confused when I try to use 'midi learn' to assign LO

I wonder if anyone can give me some info. I am running guitar rig 5 as a vst instrument in mixcraft 8. I only want to use the FCB 1010 to program change with 1-10 switches and have a volume and wah-wa

The Freestyler dmx wiki points me to this forum to find the midi map file or sysex, a member here had posted.. It will greatly aid my setup to add live cues from the drum set position on my club gigs.

Hi I'm trying to make work the wah of my FX770 with the expresion pedal of the FCB. I'm new to FCB, but change presets and using pedal B for volume works fine. What I can't do is to control the Wah, w

I’ve got this error when opening the fcb1010 manager and there’s nothing I can do. Is there any solution? Thanks Miguel

Hello fellow 1010’ers. New here, - just wanted to introduce myself. I’m a 45 y.o. guitarist out of Copenhagen, Denmark. I am not here seeking help, I am here to share my experience with a pedalboard b

Once you get the basic soldering skill, it’s quite easy to solder, but it takes a lot of time. I have a complete diagram of what wires go where.

Hi Johanne, that looks awesome. How difficult is it to wire up footswitches like those.? I've wanted to replace the originals with ones like you have. I was just going to mount them on plates to cover