Hi, I got stuck with a problem that perhaps cannot be solved, as I have a very limited understanding of how MIDI and FCB specifically actualy work. The controler works perfectly when Im using Guitar R

FCB Firmware 2.5.1E Amplitube4 recognizes my wah and volume just fine, I just can't seem to set the min and max curves so I have full function 0-100%. The other issue which I'm sure is related is it w

I got the fcb1010 to go with my synth pick up. Before I try all the programming, do I need an uno chip?

Hi Everyone, I have changed my guitar rig 2x now and I am no longer using the FCB1010. I have the original OEM chip as well as the Eureka and Uno chips. so no matter what software you are using, you w

Seems to be dead - anyone can help with the editor DL?

Hi, I bought a used FCB1010 to use for my DMX lights through the Obey 40. It turns out the board has the Uno4Kempler eprom and I cannot use it to drive the Obey. Instead of returning the board, I woul

I have unsuccessfully tried to resurrect my FCB from its cryo state ... In short, after a lengthy hiatus due to extended time overseas & other stuff, I recently renewed my efforts to kick some life in

Thanks to dtownsmr (https://groups.yahoo.com/neo/groups/fcb1010/conversations/messages/26570) I understand the processing order of PC+CC cmds in my stock FCB! (eg. PC1, PC2, PC3, PC4, CC1, CC2, PC5).

Hi all, I am using my Fcb with Kemper and UNO 4 Kemper chip. Calibration procedure should be the same with all chips and when I tried calibrating the pedals, I get the following values A1, A2..., B1,B

It is still available. What do you want from me on this? Would you like to see photos etc of what I have. We can do the transaction via paypal so we are both protected. I am no sure how much shipping

Greetings, New user here. I have researched this problem and found no answer. My FCB1010 loses all memory when the power is cycled. I have confirmed this using a midi monitor program as well as FCB101

Hi, first, thanks so much for the Join. Im new with fcb1010, i already read many files, i want to know If i can choose each effect on each pedal, like a stomp box, i have a fcb1010 uno chip, and a gmx

If there are any Boss RC-505 users around: I created dedicated FCB1010 firmware for controlling the Boss RC-505. It's dead simple, sends a hardcoded CC message on switch press and another one on switc

Hi all, Can't figure out a good way to search the messages, so I apologize if this is covered in a thread somewhere. Am looking for a good case for the fcb1010 and cables. I see one mentioned on Amazo

Attached

The Files section is still inaccessible.

I’ve been searching for a tutorial and I haven’t been able to find anything. I’m a novice on this FCB1010. A few years ago I was able to set the controller with bias fx but since then I haven’t messed

Hi All, I'm seriously considering buying an FCB1010 to control Guitar Rig 5 (by Native Instruments) for live shows in a band. I'm currently running a laptop, my DAW is Reaper, and the Native Instrumen

I could do with some help with the above please. I have set up the FCB10 to play samples on the MS but am struggling to get to play a sequence. I am using the FCB1010 with the FCB1010 editor as follow

Hi, Before I program a note to a footswitch. I change the midi channel to 5. For some how, after I program all TEN footswitches, the midi channel change back to 1. What did I do wrong? Many thanks,