|
Pedals active by default? 3 messages
Is it possible to have a default preset where both pedals are activated by default at start up? As with the default setup, I have to activate a preset - i.e. hit a foot key - for the pedals to be acti
Is it possible to have a default preset where both pedals are activated by default at start up? As with the default setup, I have to activate a preset - i.e. hit a foot key - for the pedals to be acti
|
By Jens Andersson
·
|
|
FCB1010 STOCK VERSION. CANNOT MAKE IT WORK WITH GUITAR RIG 4 OR 5... UNDER MAC OR WINDOWS. Sorry for bothering you with newby stuff. 8 messages
Hi everyone! I bought some days ago a stock FCB1010. I don`t have the possibility to change the chip here in Argentina yet. Firstly, I ran the pedal calibration properly. So then, I followed all the i
Hi everyone! I bought some days ago a stock FCB1010. I don`t have the possibility to change the chip here in Argentina yet. Firstly, I ran the pedal calibration properly. So then, I followed all the i
|
By federicosanchezg@...
·
|
|
New firmware release : "UnO2" v.1.0 21 messages
#announcement
I just released brand new firmware. "UnO2" is not a successor for the current "UnO" firmware. It's a shrinked down version of the TinyBox firmware ( https://www.tinybox.rocks ), which takes a complete
I just released brand new firmware. "UnO2" is not a successor for the current "UnO" firmware. It's a shrinked down version of the TinyBox firmware ( https://www.tinybox.rocks ), which takes a complete
|
By ossandust
·
|
|
I have the EurekaProm 3.2 having problems
New here and just like with my FCB1010 I don't know what I'm doing. So if I'm posting this incorrectly I apologize. Anyway my FCB has the Eureka Prom 3.2 in it I'm trying to get it and my bass V amp p
New here and just like with my FCB1010 I don't know what I'm doing. So if I'm posting this incorrectly I apologize. Anyway my FCB has the Eureka Prom 3.2 in it I'm trying to get it and my bass V amp p
|
By Matsaw
·
|
|
Jack Fenton 4 messages
Jack Fenton, I'm confused. You mention four interfaces, and say it failed with three of them - the Mio1, MOTU and Auido4 MIDI. I would think the fourth one, BomeBox, would be the most likely to work w
Jack Fenton, I'm confused. You mention four interfaces, and say it failed with three of them - the Mio1, MOTU and Auido4 MIDI. I would think the fourth one, BomeBox, would be the most likely to work w
|
By chrisw_63
·
|
|
fcb1010 and ART SGX 2000 9 messages
I want to make a question to the community. I have an old (guitar) sound processor from the '90s. It is the ART SGX 2000, and I am using the FCB1010. I can use the banks and direct access etc. I have
I want to make a question to the community. I have an old (guitar) sound processor from the '90s. It is the ART SGX 2000, and I am using the FCB1010. I can use the banks and direct access etc. I have
|
By fill cinefil
·
|
|
Error codes?
Two questions: 1. What should the display show if the start up sequence has finalized OK? 2. Is there a list of error codes somewhere? (I have tried to find answers to these questions in the FAQ and t
Two questions: 1. What should the display show if the start up sequence has finalized OK? 2. Is there a list of error codes somewhere? (I have tried to find answers to these questions in the FAQ and t
|
By Jens Andersson
·
|
|
Page Up Page Down buttons 2 messages
Probably a dumb question. I have the Uno 1.0.4 installed. I use it to control a Beatbuddy. I used to have a RJM Mastermind LT but switched to the FCB1010 because the bottom buttons are so much closer
Probably a dumb question. I have the Uno 1.0.4 installed. I use it to control a Beatbuddy. I used to have a RJM Mastermind LT but switched to the FCB1010 because the bottom buttons are so much closer
|
By Timothy Payne
·
|
|
88 msg + won't let me factory reset 9 messages
Hey everyone! I searched the threads and couldn't find a solution, so apologies if I missed something! I recently got an FCB1010 (using the chip it comes with, no upgrades) and I was trying to send pr
Hey everyone! I searched the threads and couldn't find a solution, so apologies if I missed something! I recently got an FCB1010 (using the chip it comes with, no upgrades) and I was trying to send pr
|
By anna
·
|
|
Unprogrammed Control Change 3 messages
Good morning FCB Group, Below is a MIDIOX screen shot of the Midi input from the FCB. I have only a note number turned on in the FCB verified using the editor. Button 1 is set to send Midi Note 1 and
Good morning FCB Group, Below is a MIDIOX screen shot of the Midi input from the FCB. I have only a note number turned on in the FCB verified using the editor. Button 1 is set to send Midi Note 1 and
|
By Len Brown
·
|
|
Conflict with controllers in Ableton? FCB1010 midi mapping works then fails 27 messages
I have several things going on. I am working with Ableton Live 9 suite. I have an MPC40 Mk 2, and MPD218 and a MPK mini in addition to the FCB1010. 1. I am using the FCB1020 script because I am unable
I have several things going on. I am working with Ableton Live 9 suite. I have an MPC40 Mk 2, and MPD218 and a MPK mini in addition to the FCB1010. 1. I am using the FCB1020 script because I am unable
|
By Len Brown
·
|
|
Guide To The FCB1010 2 messages
This post explains how to set up the MIDI channels, program a preset, set expression padel A for volume and the most common problems [URL redacted by moderator]
This post explains how to set up the MIDI channels, program a preset, set expression padel A for volume and the most common problems [URL redacted by moderator]
|
By
Faith Banini
·
|
|
moderated
Hot-Rodded FCB Stuff For Sale
#for_sale
Hi All, For any who may be interested, I'm selling off some gear. This includes the pedalboard I constructed for a previous project, which includes: Gordius Little Giant Module in good condition FCB10
Hi All, For any who may be interested, I'm selling off some gear. This includes the pedalboard I constructed for a previous project, which includes: Gordius Little Giant Module in good condition FCB10
|
By
Chris Eloranta
·
|
|
What a great and supportive group.
I’m a new member as I just bought a brand new FCB1010 on March 30, 2020. I’m setting up a woodwind controller with software and needed the expression pedal function. As I’m learning the software I’ve
I’m a new member as I just bought a brand new FCB1010 on March 30, 2020. I’m setting up a woodwind controller with software and needed the expression pedal function. As I’m learning the software I’ve
|
By John Conner
·
|
|
Apologies for a basic question. Can assign a switch to mute my tuner output and use the other nine to selct patches on my modelling amp? 8 messages
I use my FCB1010 to control a Behringer v-Amp pro. Very simple set up - I programme the patches on the V-amp and use the FCB1010 to select them,via midi, one expression pedal works as a wah and the ot
I use my FCB1010 to control a Behringer v-Amp pro. Very simple set up - I programme the patches on the V-amp and use the FCB1010 to select them,via midi, one expression pedal works as a wah and the ot
|
By
DAVID JUTTON
·
|
|
Cannot activate stompbox mode 4 messages
Hi, I am new to using the fcb1010 Uno to control the Axis FX II. I just installed the Uno chip. I initialized the memory (1 + 9 + power on) => OK I activate the stompbox mode (1 + 10 + power on) => No
Hi, I am new to using the fcb1010 Uno to control the Axis FX II. I just installed the Uno chip. I initialized the memory (1 + 9 + power on) => OK I activate the stompbox mode (1 + 10 + power on) => No
|
By Alex
·
|
|
PROBLEMS WITH POWERING UP THE FCB1010 7 messages
greetings to all When you turn on the unit, all the LEDs on both the pedals and the display automatically light up and after a moment it starts normally I would like to know if anyone knows how to sol
greetings to all When you turn on the unit, all the LEDs on both the pedals and the display automatically light up and after a moment it starts normally I would like to know if anyone knows how to sol
|
By juan manuel
·
|
|
Expression Pedal Basics: Take Control!
Learn how to take control of the expression pedal and how the volume pedal can be hacked and converted to an expression pedal. https://prezhost.com/2020/03/27/expression-pedal-basics-take-control/
Learn how to take control of the expression pedal and how the volume pedal can be hacked and converted to an expression pedal. https://prezhost.com/2020/03/27/expression-pedal-basics-take-control/
|
By
Faith Banini
·
|
|
Expression Pedals Ableton 4 messages
Hello, I am new to this beast and yes I am experiencing the learning curve. I am trying to control master volume (or any slider or knob really) in Ableton Live with the expression pedal. I have attach
Hello, I am new to this beast and yes I am experiencing the learning curve. I am trying to control master volume (or any slider or knob really) in Ableton Live with the expression pedal. I have attach
|
By Len Brown
·
|
|
Better MIDI Documentation / Implementation 2 messages
Quoting EJ SHELDON: "When it comes to MIDI, they're not famous for crystal clear descriptions. Then, none of the amp sim vendors are. But that's a rant for another day....." Hmm.. I'm wondering, We ha
Quoting EJ SHELDON: "When it comes to MIDI, they're not famous for crystal clear descriptions. Then, none of the amp sim vendors are. But that's a rant for another day....." Hmm.. I'm wondering, We ha
|
By chrisw_63
·
|