Date   

Question about UNO

Dave Saul
 

Hi guys;
How come I can’t seem “to order” the UNO Chip?
Or how do I ?

I would like to use the FCB1010 with my new Boss Katana.
Thanks;
Dave


Re: FCB1010 Uno with Amplitube

Daddy Cool
 

Thank you sir!


Re: FCB1010 Uno with Amplitube

EJ SHELDON
 

This is an ancient thread. IIRC, the sysex was just the one for using Amplitube with the FCB. Here's the file again. Remember that Amplitube uses ON/OFF values of 0/127 instead of the standard 127/0, so that's how the file is configured. If you want to use the standard (127/0) settings, reverse tose in the sysex. That will, of course, require you to do the same on each and every Amplitube BYPASS setting and, if you're using AT5, since they've done away with the GLOBAL BYPASS settings, you'll need to do that on each and every preset. PITA, but it is what it is.

SYSEX attached.


Re: FCB1010 Uno with Amplitube

Daddy Cool
 

Hmmm, I don't see the attachment!


Re: Uno2 Availability question

Daddy Cool
 

Cool, thanks for the headsup!


Re: Tuner receive

ossandust
 

On Fri, Sep 17, 2021 at 12:35 AM, chrisw_63 wrote:
I don't believe UnO2 can do much with received MIDI either
Correct. A future UnO2 version will allow to remotely control the FCB1010 through MIDI IN, but there's no device specific functionality like showing tuner info. 
The UnO4Kemper is dedicated firmware for the Kemper Profiler, so that firmware does show the tuner info of the Profiler on the FCB1010 display.


Re: Tuner receive

chrisw_63
 

The G-Major can only be controlled by MIDI.  You can, for instance, set the tuning modes.  The manual says it can send PC and CC messages, but nowhere in there does it say what those are.  Even if it could, the stock FCB1010 and UnO 1.x cannot do anything with received MIDI except for the specific SYSEX messages used for programming it.  I don't believe UnO2 can do much with received MIDI either.


Tuner receive

Jani Kallio
 

Hello, is it possible to receive a tuner data from TC electronic g-major? Uno2? Or can Uno for Kemper do that?


Re: UnO2 INIT_BANK with Direct Bank

ossandust
 

I don't communicate any expected release date because I can never predict how much time I can spend on TinyBox+UnO2 development. I wasn't able to work on this for several months now, but I recently continued working on the next firmware version again. I will first work on the TinyBox firmware, because that is much easier to test and debug thanks to the USB-based firmware updates. After that I will copy most or all of the features to the UnO2 firmware. I am also working on a test environment which can do a fully automated functional test of a TinyBox and an UnO2 equipped FCB1010. This will allow to test each and every available command with a press on a button, and ensure that new firmware release doesn't break existing functionality. TinyBox bugfix releases are easy, but UnO2 firmware requires thorough testing in order to avoid sending around buggy EPROM chips.

I have already updated the UnO2 changelog with a list of the expected new features for the next release (not sure yet if I will succeed to get all of that in the FCB1010 EPROM - it will definitely be the last major UnO2 release)  :
https://www.fcb1010.eu/downloads/uno2_changelog.txt 

- add-on : possibility to use the up/down switches as preset switches instead of bank up/down
- add-on : possibility to use a data variable for specifying the MIDI channel of MIDI messages
- add-on : command "SendPedal 1" / "SendPedal 2" to send the message for the current expr.pedal position 
- add-on : command "GotoSong" / "GotoBank" 
- add-on : INIT_BANK support for the Direct Bank
- add-on : possibility to check on current bank/song/preset in conditional commands :
           if(#CURRENT_BANK ==/!= "...") if(#CURRENT_SONG ==/!= "...") if(#CURRENT_PRESET ==/!= "...")
- add-on : possibility to check on an effect state in conditional commands :
           if(EFFECT_ON "...")  if(EFFECT_OFF "...")
- add-on : possibility to send SysEx with the expression pedals
- add-on : possibility to remotely control the FCB1010 through MIDI IN : 
           CC 00 nn = GOTO BANK nn
           PC 00-09 = click/release footswitch 1 - 10
           PC 14-15 = click/release Down/Up switch


Re: UnO2 INIT_BANK with Direct Bank

uno@...
 

Just to follow up on this - it would be really valuable to trigger some additional functionality whenever the Direct Bank is activated. Maybe INIT_Bank is not the correct way (as it is also not called for the original bank when you return from the Direct Bank), but some functionality like this would be really awesome and on #1 of my wishlist.

Are you planning to release a firmware update sometimes soon?


Re: Uno2 Availability question

Bobby Maestas
 

I can't ask for more than that! I'll be ordering soon!


Re: Uno2 Availability question

rcharlier3
 
Edited

Don't know if it helps the discussion or not -
I'm in the USA.  Ordered a chip a month ago.  Shortly after, I received notice that the order was being shipped.  +13 days after I placed the order, I had the chip in my hands.  +1 hour later, the chip was in my pedalboard.  Not too long after I had a working program uploaded to the unit.
Of course shipping times may vary so don't expect the same results.


Re: Uno2 Availability question

ossandust
 

Of course no reason to apologize, re-reading my reply I notice it might have sounded different than intended. I just meant that I wouldn't accept pre-paid orders for something which cannot be shipped on short notice. 
regards,
Xavier


Re: Uno2 Availability question

Bobby Maestas
 

Thank you Xavier. I didn't mean any offense or disrespect. If I did either, I apologize - I assure you it wasn't intentional.

Thanks again,
Bobby


Re: Uno2 Availability question

ossandust
 

On Mon, Jul 5, 2021 at 11:38 PM, Bobby Maestas wrote:
I’ve ordered and paid for merchandise that wasn’t in stock
If we don't have stock we don't accept orders (didn't happen the past 15 years...) 
regards,
Xavier


Re: Uno2 Availability question

Bobby Maestas
 

Excellent! Thanks Roger!


Re: Uno2 Availability question

Roger Colwell
 

Bobby, you are likely to have an update very soon on the availability, from the author/vendor himself: ossandust

However, as I write this it's almost 0100 here in the UK and ossandust's location is 0200, so he's likely fast asleep (dreaming of new UnO2 orders)!

--
Roger Colwell
FCB1010_UnO Group Owner/Moderator


Re: Uno2 Availability question

Bobby Maestas
 

do with Uno?” That’s my question! Do you have information on that or is that just a guess?


Re: Uno2 Availability question

Bobby Maestas
 

“Why not just order?”  Because over the last few months I’ve ordered and paid for merchandise that wasn’t in stock. All of them blamed back orders and shortages. I prefer to order when the item is in stock.

”most likely nothing to 


Re: Uno2 Availability question

David Grosz
 

why not just order it instead of asking about a general shortage of chips most likely having nothing to do
with UnO


On Monday, July 5, 2021, 11:32:37 AM PDT, Bobby Maestas <bobby.maestas@...> wrote:


Hello! I want to buy an Uno2, but I know there’s a chip shortage going on for many people. Does anyone know about the current status for Uno2?

Thanks!
Bobby

481 - 500 of 9111