Yeah, I doubt if you will find it on eBay. Way to many Uno1 pirates out there selling chips. Even if you do find a chip, you will still need to go to their website for the license key.

Hey, was looking to upgrade from the UnO to the UnO2, but I'm short on money, especially with the delivery price for those outside the EU (thanks Brexit). I've checked ebay and there are only UnO 1s

I put those into a template file I use for testing things, worked fine. Are you using MIDI Monitor to check first if the pedals are sending, or going straight to Mainstage?

Might just be me (it usually is) but the manual seems strangely light on how to programme the two expression pedals. Or maybe there's really not much to it. Anyways, I have added a few lines of code

Hi EJ, Thanks alot for time and effort. These functions you mention would be enough for me. BTW, I find Rig 6 better sounding then 5. I know the community is screaming for better MIDI functions

On Tue, Feb 23, 2021 at 07:35 PM, Jack Fenton wrote: Can you remotely control the relays too?aha, you're right, that was added later on - attached the updated document

Interesting. Can you remotely control the relays too? I didn't see it on the PDF sheet but maybe I missed it. Yes, it looks like TinyBox would indeed be another solution if you need full LED control.

On Tue, Feb 23, 2021 at 04:04 PM, Jack Fenton wrote: I know of no other chip that allows for this level of LED and 7 segment display controlWe do have such chip, which allows to control each LED and

Hi Jeroen! I don't have GR6, they're not getting any more of my money until they have enough new amps (the old one's mostly suck IMO), and if they've diminished their once best in class MIDI

If you want complete control of FCB1010 LED's, then I'm afraid you would have to take all of the "smarts" out of the FCB1010 but getting the EurakaProm and then setting in up in IO mode. You would

I get it. I'm in a Pink Floyd tribute and I literally can't remember the setup for each song without programming it in advance. I'm going to grab the UNO2 soon to check it out, but it sounds like

On Tue, Feb 23, 2021 at 01:39 PM, jeroen@... wrote: since my Midi-interface (E-MU Xmidi 2x2, powered by Firewire, on Mac Pro Mojave) is giving these timeout’s on the testpage:

It seems easier to unplug the MIDI cable than to go to the editor and write a command to disable MIDI Thru. But I'm probably missing something here? (in a TinyBox setup this is part of the more

I’m followig different discussions and advice here now for a while. I need to do the following: As a guitar teacher, get some basic switch functions in Guitar Rig 6 and FCB1010. (Firmware

All the other FCB1010 firmware versions allowed MIDI Thru to be turned off. Reading through the manual, it seems that it doesn't - MIDI Thru is always on. Any chance this can be added? (Feature

Hey Dan, Thanks for the reply! I checked out the Gordius - shame they are all now discontinued. Ossandust responded after your post and confirmed that the Uno2 equipped FCB just passes MIDI thru - so

Solved, it was just a problem of having special characters in the user name - the current license server converts such characters, that was not yet the case 5 years ago.

The Gordius Little Giant is indeed fully remote controllable : you can select songs or banks, select presets, activate effects, press LittleGiant footswitches by sending MIDI messages to the device.

Hey Shayne, I'm using Bandhelper to trigger the Gordius Little Giant with AxeFXII. UNO2 is based on the Gordius - all from Ossandust genius. I can verify that Bandhelper works with the Gordius, so

Hey! That serves me right for assuming…. I was sure that the FCB could accept a bank change from another device, however if it’s a MIDI THRU only device than I can work around it… My