use an editor software and life will be so much easier

#wanted

A question was asked in a FCB1010 Facebook group about is there a way to send a note where it stays on when released and press again to turn the note off like a stomp box and this was what I found and

Ok, way to many things going on to try and answer your question so what I did is take your above idea and just programmed it with my editor and sent the pdf attached below of what your after. So what

Bpy ypu Helix guys are picky Ok the Presets in Bank 2 did not do anything because nothing was defined, they are defined at the bottom of the program. Note 1 thru 5 is like this PRESET 001 = { SendMidi

The attached pdf is my template for using my FCB1010 with the new UnO2 chip with my Axe-Fx II. Having a template established makes building your setup easier by simply adding or taking away. To see fo

Its not so much difficult is a new way of thinking about it and once you get it then its pretty easy. A few things I learned is "shift ?" brings up a window predicting what you want to do and follow i

Here is a few issues I see and coppy paste into your editor from PRESETS down !. you do not assign a midi channel to the FCB 2. for effects it looks as though you have 16 loops and I am not familiar w

Ok that makes more sense and I will make a better example for you when I get back home and your loop switcher having relays helps alot

Copy/paste this into editor and wow would it not be easier to help if we could simply share a file instead of this cut and paste nonsense

Well first thing you do not need any midi in to the FCB only midi out and then in out to other devices so try out of FCB to your loop switcher and make sure switcher channel is set correctly on both t

So here is the deal you need to write down what you want to happen when you press a button. So I have included a pic of a complex preset which in reality is not the way I would do this but I made this

Good news and going forward give it some thought as to what you want to do such as the expression pedals which I would think would be used with the G Major to control some things but the UnO2 chip mak

Glad to be able to help and I was in a spot where you are not long ago and finding help was an issue but I got thru it and now I try and help others. One thing I learned is once you get the red bar of

It is simply a matter of PC & CC messages as far as the FCB is concerned and the pedals must be programmed for every button unless you have the UnO2 chip. So with that said you can do the switches how

Here is a pdf I made when I used the UnO chip and in my set up Bank 00 changed Scenes & Bank 09 was for the Looper and everything in between changed but this might help you to see I have pedals active

why not just order it instead of asking about a general shortage of chips most likely having nothing to do with UnO https://www.fcb1010.eu/

Have you done the calibration for each pedal? Also look at the gradient strip to make sure it is clean and check that the LED is in the correct position. Ir's doubtful this is a firmware issue but any

#UnO2

Augie Have you watched these demos at the link? https://www.fcb1010.eu/uno2_demo.html there are 5 or 6 examples that go thru making a full setup with the links for the rest at the bottom of the page T

Augie To me having stock chip then UnO chip and then the UnO2 I would say yes it is worth it. Why? Well among lots of things simply having virtual heel and toe switches alone makes it worth the price

Tortellini Now I am moderately new but I modified your above setup and added to it to make the Stomps toggle on/off each button press. What I do to save outside the editor is to copy and paste from ed