Hi.

I have just bought an UnO firmware EPROM.

Is there a PC editor that supports the stompbox mode of this firmware?

I have downloaded the Ripwerx Editor, but it just displays the 10
bank/10 preset mode. And I couldn't find the all the preset setup
options (ex. cc toggle primary and alternate values).

Thanks in advance.

Virgilio

Hi Virgilio!

I have just bought an UnO firmware EPROM.

Welcome to the club ;-)

Is there a PC editor that supports the stompbox mode of this firmware?

I have downloaded the Ripwerx Editor, but it just displays the 10
bank/10 preset mode. And I couldn't find the all the preset setup
options (ex. cc toggle primary and alternate values).

The Ripwerx Editor is fully compatible with the stompbox mode, but You have
to load Your Sysex file from the FCB first (already equiped with UnO, can be
"blank") to show the additional features.

Regards

Zsazsi

Virgilio,

Yes, the Ripwerx tool will support this. First make sure your UnO-
equipped FCB1010 has had the "memory initialization" step performed.
Then "get" a message from the FCB and look at the Global tab. There
is a Stomp setting available.

If you opened a non-UnO file or selected New from the file menu, you
will not see the new UnO settings. For now, you must get an UnO sysex
dump from the FCB.

Once you do this, look at your Preset View Options within the Tools
menu. This will ensure you display the features that interest you.

Good Luck.

--- In fcb1010_uno@..., "Virgilio" <virgilioat@y...> wrote:

Hi.

I have just bought an UnO firmware EPROM.

Is there a PC editor that supports the stompbox mode of this

firmware?

I have downloaded the Ripwerx Editor, but it just displays the 10
bank/10 preset mode. And I couldn't find the all the preset setup
options (ex. cc toggle primary and alternate values).

Thanks in advance.

Virgilio

Thanks, guys. I'll do it.

Suggestion: couldn't this information be somewhere in
the user's guide? Maybe somewhere near the
compatibility table.

Virgilio



--- Mike Riley <the-bug@...> wrote:

Virgilio,

Yes, the Ripwerx tool will support this. First make
sure your UnO-
equipped FCB1010 has had the "memory initialization"
step performed.
Then "get" a message from the FCB and look at the
Global tab. There
is a Stomp setting available.

If you opened a non-UnO file or selected New from
the file menu, you
will not see the new UnO settings. For now, you
must get an UnO sysex
dump from the FCB.

Once you do this, look at your Preset View Options
within the Tools
menu. This will ensure you display the features
that interest you.

Good Luck.

--- In fcb1010_uno@..., "Virgilio"
<virgilioat@y...> wrote:

Hi.

I have just bought an UnO firmware EPROM.

Is there a PC editor that supports the stompbox

mode of this
firmware?

I have downloaded the Ripwerx Editor, but it just

displays the 10

bank/10 preset mode. And I couldn't find the all

the preset setup

options (ex. cc toggle primary and alternate

values).

Thanks in advance.

Virgilio

Yahoo! Groups Links


fcb1010_uno-unsubscribe@...

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Virgilio,

Yes, it could. sliding_bill also fell into this trap. So, I plan to
do some things about it...

--- In fcb1010_uno@..., "Virgilio C. Ataide"
<virgilioat@y...> wrote:

Thanks, guys. I'll do it.

Suggestion: couldn't this information be somewhere in
the user's guide? Maybe somewhere near the
compatibility table.

Virgilio