Locked UNO V1.3 SWEEP sysex with variables
|
On Thu, Jun 2, 2022 at 01:21 PM, Rüdiger Heinrich wrote:
Please pay the refund back to my PayPal account (Email@).Please reply to ossandust's email address directly, as he requested you to do! NOT HERE, or in any other topic! It is no longer appropriate to continue this discussion and therefore I'm locking the topic! -- Roger Colwell FCB1010_UnO Group Owner/Moderator |
|
|
|
Rüdiger Heinrich <ruedigerheinrich@...>
Please pay the refund back to my PayPal account (Email@).
Gesendet von Mail für Windows
Von: ossandust
Just email me to process the refund
|
|
|
|
ossandust
Just email me to process the refund
|
|
|
|
Rüdiger Heinrich <ruedigerheinrich@...>
I want to have a refund, because UNO2 v1.3 is useless to me and there are „Bugs“ in it.
Gesendet von Mail für Windows
Von: ossandust
On Wed, Jun 1, 2022 at 04:46 PM, Rüdiger Heinrich wrote:
As mentioned before checksum calculation is a brand specific thing, not part of the MIDI spec. I will not add this to the UnO2 firmware
|
|
|
|
ossandust
On Wed, Jun 1, 2022 at 04:46 PM, Rüdiger Heinrich wrote:
the posiblity to calculate the checksum in the sysex or an automatic solution.As mentioned before checksum calculation is a brand specific thing, not part of the MIDI spec. I will not add this to the UnO2 firmware |
|
|
|
Rüdiger Heinrich <ruedigerheinrich@...>
I meant with pedal value the posiblity to calculate the checksum in the sysex or an automatic solution.. I have tested your v1.3 and reported the errors! I not going to pay anything more, until „all“ Bugs are solved!
Gesendet von Mail für Windows
Von: ossandust
On Wed, Jun 1, 2022 at 03:28 PM, Rüdiger Heinrich wrote:
There is a link in the last topic of the FAQ on our website to purchase an update
If you mean using a variable in a sweep sysex, that is added to this release.
|
|
|
|
ossandust
On Wed, Jun 1, 2022 at 03:28 PM, Rüdiger Heinrich wrote:
There is a link in the last topic of the FAQ on our website to purchase an update If you mean using a variable in a sweep sysex, that is added to this release. |
|
|
|
Rüdiger Heinrich <ruedigerheinrich@...>
You have relaesd UNO2 V1.4. How do I get the update? What about the pedal value issue?
Gesendet von Mail für Windows
Von: ossandust
oh I see, you are correct.
|
|
|
|
ossandust
oh I see, you are correct.
- apparently using variables in a "sweep sysex" is not yet supported. - there's a firmware bug which causes a sysex sweep to work only on the leftside expressionpedal ("pedal 1"). Will be solved in a next firmware release. For now you will need to use the right side pedal for "more conventional things" like volume adjustment. Instead of using variables in the sweep sysex, you can create multiple sweep definitions and then use the "Pedal 1 = ...." command to reassign a different sweep, instead of setting a variable value. Thanks for reporting and providing the test setup. |
|
|
|
ruedigerheinrich@...
A integer variable is specified as a decimal value and is correctly put into a non-sweep sysex. The variables are not correctly put into a sweep sysex. The „value“ pedal Position is ok. Try added test.
Gesendet von Mail für Windows
Von: ossandust
Sysex content must indeed be entered as hex values. And make sure you have correctly calibrated both pedals. If that doesn't solve it, send me a copy of your setup and the details of what doesn't work correctly.
|
|
|
|
ossandust
Sysex content must indeed be entered as hex values. And make sure you have correctly calibrated both pedals. If that doesn't solve it, send me a copy of your setup and the details of what doesn't work correctly.
|
|
|
|
Jack Fenton
My guess is you are seeing the values as hex on output and entering them as decimal into the variables.
|
|
|
|
ruedigerheinrich@...
integer variables are not correctly put into the sysex.
The values put into the sysex are different from the defined value. The sweep sysex works only on pedal 1, that is ok for me, but perhaps not for all. |
|
|
