Yes, there is a way. That's how I programmed my FCB1010 with UNO2 v1.4. Each pedal can call several functions, depending on the time they are held. More, I set NO_UPDOWN_SWITCHES to affect functions to the up and down switches, but they still act as next/previous bank if they're held more than 1 second.

Hi Oliver,

Sorry, can't help with that, it's not included in the Lite edition. Good Luck!

Yes, I understand. You are asking about the big button on the left of the Looper effect’s GUI. Here’s a screenshot with the description of the multi-purpose button. If you need more info, Ableton’s reference manual covers the Looper effect in section 24.27 of its reference manual. Here’s the URL: Ableton.com/en/manual/live-audio-effect-reference/

I'm asking about the "big multifunction buttob" because there's no mention of anysuch thing in the manual.

Hi,

On Sun, Sep 4, 2022 at 12:32 AM, <clippeh.kulinski@...> wrote:

the big multifunction button on looper

???

I'm using v11 Lite. What version are you using, and which button are you referring to?

On Sun, Sep 4, 2022 at 05:16 AM, <clippeh.kulinski@...> wrote:

if ossan is around... is this planned for future releases

No, this is one of the many features which was available in the GORDIUS controllers but removed for the TinyBox and UnO2 firmware

and will I have to buy a new chip

Any FCB1010 firmware update requires buying a new chip. That is one of the reasons why the more complex GORDIUS functionality has not been implemented in the UnO2 firmware 

Hi EJ,

Thanks for the reply.

I've realised that the button in the looper device on ableton actually has specific functions that change depending on how long you press the button for. That will suffice for now. but I'm having a big problem. Should i be using effects or triggers and should i be using CCs or NoteOns in my UnO2 control centre script...?

I have read the documentation but i ask because I'm getting a strange glitch. It might be similar to the one in this thread but I'm unsure:

https://fcb1010.groups.io/g/uno/topic/89707291#8824

I've noticed for some reason that after i record my first loop, it goes into overdub mode but then quickly exits and undo is pressed (without me pressing anything)
What is happening is probably that the function of the big multifunction button on looper is recognising my single button click as a long hold (and as a result undoing, as it says in the ableton information pane). I don't know how to prevent it from thinking that I'm holding it instead of clicking once.

I tried:

TRIGGER_CLICK which sends a midi NoteOn, and then a Midi NoteOff for TRIGGER_RELEASE
but it still does the same thing. Undo is triggered somehow???? Should NoteOff have a velocity of 0? or 127?

If anyone has run into this, please advise

Thanks,

Oliver

On Sat, Sep 3, 2022 at 11:16 PM, <clippeh.kulinski@...> wrote:

Is it possible to send MIDI note 1 on initial click, but MIDI note 2 on a click that was held for more than x seconds?

No.

I tried searching through the threads and I note there's no mention of it in the manual but there might be a smart way to do this:

Is it possible to send MIDI note 1 on initial click, but MIDI note 2 on a click that was held for more than x seconds?
I'm trying to program my footpedal to have functions that are in some retail loopers ie. click button to record, click+hold same button to clear recording (when MIDI is linked to the ableton looper device)

Otherwise if ossan is around... is this planned for future releases and will I have to buy a new chip or can i just update the firmware somehow?...
Thanks
Oliver