1. Fcb1010 | Uno
  2. Topics

Ripwerx for UnO1.0.2D

Mike
 

Ripwerx users,

If any of you ALREADY have an UnO 1.0.2D chip, ripwerx is not quite
ready for it. I need to do a very minor update to the application,
but I need to test it with an UnO chip. So, I'm waiting for some
blank chips to arrive. Hopefully, I'll get the chips Monday, burn
one, test, and post a ripwerx update early next week.

If you try to use Ripwerx with UnO 1.0.2D with the current ripwerx
release, you won't have access to any of the UnO functions - it'll
look like the old, boring, stock firmware.

Respectfully,

mike riley
ossandust
 

Thanks for all the UnO-related efforts, Mike.

if in the coming weeks there would be following one more UnO upgrade -
I really think I'm calling that one version 1.0.2.Z you know... so
that you too can sit down and relax, using a stable FCB1010 /
PC-editor combination which should last for a few more years... ;-)

X.

--- In fcb1010_uno@..., "Mike Riley" <the-bug@...> wrote:

Ripwerx users,

If any of you ALREADY have an UnO 1.0.2D chip, ripwerx is not quite
ready for it. I need to do a very minor update to the application,
but I need to test it with an UnO chip. So, I'm waiting for some
blank chips to arrive. Hopefully, I'll get the chips Monday, burn
one, test, and post a ripwerx update early next week.

If you try to use Ripwerx with UnO 1.0.2D with the current ripwerx
release, you won't have access to any of the UnO functions - it'll
look like the old, boring, stock firmware.

Respectfully,

mike riley
Steve Meiers
 

I think I'm going to buy a PROM programmer this time just the same,
just in case z1.3a etc ;) I already have 1.0.2.b and c, so why not?

I see some on eBay for $35, and the blanks are only a couple dollars
my local the parts shop.

Is this OK?
http://cgi.ebay.com/Universal-Programmer-Eprom-MPU-PIC-controller-PLD-Flash_W0QQitemZ5868394605QQcategoryZ294QQrdZ1QQcmdZViewItem

Or this?
http://cgi.ebay.com/27c256-Enhanced-Willem-EPROM-Programmer-BIOS-FWH-ATMEL_W0QQitemZ7591585467QQcategoryZ4661QQrdZ1QQcmdZViewItem

Any other recommendations as far as PROM programmers?

Thanks,

Steve M

--- In fcb1010_uno@..., "ossandust" <ossan.dust@...> wrote:

Thanks for all the UnO-related efforts, Mike.

if in the coming weeks there would be following one more UnO upgrade -
I really think I'm calling that one version 1.0.2.Z you know... so
that you too can sit down and relax, using a stable FCB1010 /
PC-editor combination which should last for a few more years... ;-)

X.

--- In fcb1010_uno@..., "Mike Riley" <the-bug@> wrote:

Ripwerx users,

If any of you ALREADY have an UnO 1.0.2D chip, ripwerx is not quite
ready for it. I need to do a very minor update to the application,
but I need to test it with an UnO chip. So, I'm waiting for some
blank chips to arrive. Hopefully, I'll get the chips Monday, burn
one, test, and post a ripwerx update early next week.

If you try to use Ripwerx with UnO 1.0.2D with the current ripwerx
release, you won't have access to any of the UnO functions - it'll
look like the old, boring, stock firmware.

Respectfully,

mike riley

1 - 3 of 3