locked UNO V1.3 SWEEP sysex with variables


ruedigerheinrich@...
 

integer variables are not correctly put into the sysex.
The values put into the sysex are different from the defined value.
The sweep sysex works only on pedal 1, that is ok for me, but perhaps not for all. 


Jack Fenton
 

My guess is you are seeing the values as hex on output and entering them as decimal into the variables.


ossandust
 

Sysex content must indeed be entered as hex values. And make sure you have correctly calibrated both pedals. If that doesn't solve it, send me a copy of your setup and the details of what doesn't work correctly.


ruedigerheinrich@...
 

A integer variable is specified as a decimal value  and is correctly put into a non-sweep sysex.

The variables are not correctly put into a sweep sysex.

The  „value“ pedal Position is ok.

Try  added  test.

 

Gesendet von Mail für Windows

 

Von: ossandust
Gesendet: Montag, 16. Mai 2022 23:03
An: uno@fcb1010.groups.io
Betreff: Re: [fcb1010_uno] UNO V1.3 SWEEP sysex with variables

 

Sysex content must indeed be entered as hex values. And make sure you have correctly calibrated both pedals. If that doesn't solve it, send me a copy of your setup and the details of what doesn't work correctly.

 


ossandust
 

oh I see, you are correct.
- apparently using variables in a "sweep sysex" is not yet supported. 
- there's a firmware bug which causes a sysex sweep to work only on the leftside expressionpedal ("pedal 1").
Will be solved in a next firmware release. For now you will need to use the right side pedal for "more conventional things" like volume adjustment. 
Instead of using variables in the sweep sysex, you can create multiple sweep definitions and then use the "Pedal 1 = ...." command to reassign a different sweep, instead of setting a variable value. 

Thanks for reporting and providing the test setup.  


Rüdiger Heinrich <ruedigerheinrich@...>
 

You  have relaesd UNO2  V1.4.

How do I get the  update?

What about the pedal value issue?

 

Gesendet von Mail für Windows

 

Von: ossandust
Gesendet: Dienstag, 17. Mai 2022 21:25
An: uno@fcb1010.groups.io
Betreff: Re: [fcb1010_uno] UNO V1.3 SWEEP sysex with variables

 

oh I see, you are correct.
- apparently using variables in a "sweep sysex" is not yet supported. 
- there's a firmware bug which causes a sysex sweep to work only on the leftside expressionpedal ("pedal 1").
Will be solved in a next firmware release. For now you will need to use the right side pedal for "more conventional things" like volume adjustment. 
Instead of using variables in the sweep sysex, you can create multiple sweep definitions and then use the "Pedal 1 = ...." command to reassign a different sweep, instead of setting a variable value. 

Thanks for reporting and providing the test setup.  

 


ossandust
 

On Wed, Jun 1, 2022 at 03:28 PM, Rüdiger Heinrich wrote:

How do I get the  update?

There is a link in the last topic of the FAQ on our website to purchase an update

What about the pedal value issue?

If you mean using a variable in a sweep sysex, that is added to this release.


Rüdiger Heinrich <ruedigerheinrich@...>
 

I meant with pedal value the posiblity to calculate the checksum in the sysex or an automatic solution..

I have tested your v1.3 and reported the errors!

I not going to pay anything more, until „all“ Bugs are solved!

Gesendet von Mail für Windows

 

Von: ossandust
Gesendet: Mittwoch, 1. Juni 2022 18:34
An: uno@fcb1010.groups.io
Betreff: Re: [fcb1010_uno] UNO V1.3 SWEEP sysex with variables

 

On Wed, Jun 1, 2022 at 03:28 PM, Rüdiger Heinrich wrote:

How do I get the  update?

There is a link in the last topic of the FAQ on our website to purchase an update

What about the pedal value issue?

If you mean using a variable in a sweep sysex, that is added to this release.

 


ossandust
 

On Wed, Jun 1, 2022 at 04:46 PM, Rüdiger Heinrich wrote:
the posiblity to calculate the checksum in the sysex or an automatic solution.
As mentioned before checksum calculation is a brand specific thing, not part of the MIDI spec. I will not add this to the UnO2 firmware


Rüdiger Heinrich <ruedigerheinrich@...>
 

I want to have a refund, because UNO2 v1.3 is useless to me and there are „Bugs“ in it.

 

Gesendet von Mail für Windows

 

Von: ossandust
Gesendet: Mittwoch, 1. Juni 2022 18:54
An: uno@fcb1010.groups.io
Betreff: Re: [fcb1010_uno] UNO V1.3 SWEEP sysex with variables

 

On Wed, Jun 1, 2022 at 04:46 PM, Rüdiger Heinrich wrote:

the posiblity to calculate the checksum in the sysex or an automatic solution.

As mentioned before checksum calculation is a brand specific thing, not part of the MIDI spec. I will not add this to the UnO2 firmware

 


ossandust
 

Just email me to process the refund


Rüdiger Heinrich <ruedigerheinrich@...>
 

Please pay the refund back to my PayPal account (Email@).

 

Gesendet von Mail für Windows

 

Von: ossandust
Gesendet: Mittwoch, 1. Juni 2022 20:11
An: uno@fcb1010.groups.io
Betreff: Re: [fcb1010_uno] UNO V1.3 SWEEP sysex with variables

 

Just email me to process the refund

 


Roger Colwell
 

On Thu, Jun 2, 2022 at 01:21 PM, Rüdiger Heinrich wrote:
Please pay the refund back to my PayPal account (Email@).
Please reply to ossandust's email address directly, as he requested you to do! NOT HERE, or in any other topic!
It is no longer appropriate to continue this discussion and therefore I'm locking the topic!
 
--
Roger Colwell
FCB1010_UnO Group Owner/Moderator