Hey all. Brand new here. Have had an FCB1010 for years, and am now considering using it as a stompbox/controller for software such as Amplitube 3. I've run into some limitations of what I can do with

Hi everybody, I got my UnO2 chip yesterday and started playing around with it. First off: wow! I'm amazed at the level of functionality crammed in there, and how advanced the programming interface is.

everytime i try to hook up my usb interface it says it cant find my 1010.and i used 2 turtle beach and a roland ________________________________ Sent: Monday, December 7, 2020 1:14 PM To: uno@fcb101

Hello all. I'm considering buying an Uno, mainly to take advantage of the 'momentary' function. I'm curious to know, how are these features activated on a pedal? Also, with the Uno 1.0.4, can the bank

Here is an interesting article that provides a guide to the FCB1010. You will love to read it https://baninii.com/2020/12/03/guide-to-the-fcb1010/ Kofi

Hi everyone! I'm a total n00b in the MIDI guitar oriented world and I recently bought a MIDI Looper/Switcher for my stompboxes. My rig is currently: -Stompboxes: Whammy 4, TS9, Phase 45, Phase 90 Scri

Hi, I'm totally new to the FCB1010 with Uno and would be very thankful if someone could give me hints how to programm it for use with Line6 Helix Native in the Preset/Snapshot mode like on the Helix F

I had a couple of music projects that I had to finish but just got around to working with the Control Center to program my FCB for the Line6 HX Stomp. IT WAS A BREEZE! i set set up switches 1 through

I really love the tipswitch function that comes with UnO2. Unfortunately it seems that the dead range (zone between max value and the tipswitch) is fixed in angle. I want to stick some foam beneath th

The attached pdf is my template for using my FCB1010 with the new UnO2 chip with my Axe-Fx II. Having a template established makes building your setup easier by simply adding or taking away. To see fo

Hello there, I've sat down and tried program the chip again. I want to control a Line6 Helix Stomp for now (and maybe later a DMX controller...) and want to emulate stompboxes, i.e. I want to be able

A question was asked in a FCB1010 Facebook group about is there a way to send a note where it stays on when released and press again to turn the note off like a stomp box and this was what I found and

I seem to have FCB, ControlCenter, Midi interface, Mainstage all connected: if I press a button on the FCB, Mainstage registers activity. So what I want to do is press a button on the FCB that presses

been using for atleast a year with no problems. Now it's behaving very strangely. -Stompbox mode is gone -not all the buttons work for patch change Is there a reset procedure for the chip? I also trie

Hello everyone, I seem to be having a problem with Direct Select. I do not want to use this mode. From the editor I send a sysex to the FCB with the Direct Select unchecked. Editor confirms the file w

( Sorry for the double post but I thought this message might be relevant for both FCB1010 groups ) I just released brand new firmware. "UnO2" is not a successor for the current "UnO" firmware. It's a

Can you still use the FCB as a slave with the uNo eprom?

This post explains how to set up the MIDI channels, program a preset, set expression padel A for volume and the most common problems https://prezhost.com/2020/05/11/guide-to-the-fcb1010-2/

Do you want to set up your Behringer X-Air mixer to be controlled from the X AIR app on you mobile device? Here are simple steps to help you do just that. https://prezhost.com/2020/04/19/set-up-behrin

I'm trying to set up the expression pedals, and as far as I understand the LEDs shoud turn on when you enable the pedals in the software but my won't turn on, and I get no response from the actual ped