Hello everyone, I seem to be having a problem with Direct Select. I do not want to use this mode. From the editor I send a sysex to the FCB with the Direct Select unchecked. Editor confirms the file w

( Sorry for the double post but I thought this message might be relevant for both FCB1010 groups ) I just released brand new firmware. "UnO2" is not a successor for the current "UnO" firmware. It's a

Can you still use the FCB as a slave with the uNo eprom?

This post explains how to set up the MIDI channels, program a preset, set expression padel A for volume and the most common problems https://prezhost.com/2020/05/11/guide-to-the-fcb1010-2/

Do you want to set up your Behringer X-Air mixer to be controlled from the X AIR app on you mobile device? Here are simple steps to help you do just that. https://prezhost.com/2020/04/19/set-up-behrin

I'm trying to set up the expression pedals, and as far as I understand the LEDs shoud turn on when you enable the pedals in the software but my won't turn on, and I get no response from the actual ped

Hi dear community! Recently I bought UNO chip v. 1.0.4 and trying to control some stomps on TH-U Overloud. I am new to MIDI, so It's difficult to me grasp some basics. I uploaded My.THU.syx file to Co

Hi! I've read this snippet of the manual for Uno chip v.1.04 but still it is not clear to me. " A special case of “momentary toggling’ is implemented: in this mode, a CC message with programmed value

Learn how to take control of the expression pedal and how the volume pedal can be hacked and converted to an expression pedal. https://prezhost.com/2020/03/27/expression-pedal-basics-take-control/

Hi everyone, I got an FCB 1010 with 1.0.2.f UnO Firmware, no Control Software for now. I'd like to use it in stompbox mode in the lower row, to activate / deactivate stomps in TH-U Overloud, using the

This guide walks through sending and receiving a sysex dump with MIDI-OX in order to back up presets on the Code. https://prezhost.com/2020/03/14/sending-and-receiving-sysex-dumps-with-midi-ox/

Do you want to calibrate the expression pedals on your Behringer FCB1010? Here are the steps below to https://prezhost.com/2020/03/10/the-expression-pedals-on-behringer-fcb1010-midi-foot-controller/

This article covers the use of a FCB1010 running UnO firmware and one Boss FV500 as an extra expression pedal (connected via the pedal jack). My goal was to set up the FCB1010 to work exactly the same

I am trying to get some type of communication/connection with my FCB1010 and Guitar Rig 5 but nothing seems to work. I'm not getting any communication with the FCB1010 in Amplitube 4 either for what t

Overview The FCB1010 is a MIDI controller pedal. It is used to control other MIDI gear like guitar modelers, MIDI capable guitar amps, rack mounted effects units and synthesizers. The most common use

Ok, not sure if I have a mechanical issue or setup issue. I have an FCB1010 with an UnO 1.0.4 chip. Everything's working great except expression pedal B (the furthest one from the switches). I'm only

Anyone still have a ripwerks file I can look at to setup up looper controls on bank 0. I have my FCB1010 setup with stompbox top row and AXE-FXII scenes bottom row. I have bank 0 free and not in use s

As stated presets 1-9 show on the display as ( 00 - 09) the next 10 show as ( 00. - 08.) I can't get it to display the 10's digit. I'm using uno chip with the Ripwerks program which works perfectly wi

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the uno@fcb1010.groups.io group. /H&K GMD40 - FCB1010 UnO/FCB1010-UnO-H&K_G

good day fine people, I have recently replaced the original chip with uno v1.0.4. Something seems to be wrong though, I was expecting to be able to scroll through banks and use the pedalboard as a sto